Center Fascia Upper Panel Repair Procedures

Replacement

Wear gloves to protect your hands.

When prying with a flat-tip screwdriver or a trim tool, wrap the tool with protective tape and apply protective tape to the surrounding parts to prevent damage. Use a plastic panel removal tool to remove the interior trim parts so as not to damage the surface. Be careful not to bend or scratch the trim and panels.

1. 1
   Using a screwdriver or remover, remove the center fascia lower panel assembly (A).

   

2. 2
   Disconnect the A/C and heater controller connectors (A).

   

3. 3
   Lower the steering wheel.
4. 4
   Using a screwdriver or a puller, remove the upper cover of the steering column shroud (A).

   

5. 5
   Using a screwdriver or a puller, remove the upper cover of the instrument panel assembly (A).

   

6. 6
   Loosen the mounting screw, then remove the center fascia upper panel assembly (A).

   

7. 7
   Install in the reverse order of removal.

   Replace any damaged clips.