Hyundai Sonata LF Quiz
Body (Interior and Exterior)

Crash Pad Garnish Assembly [RH] Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 9Engine Mechanical System — 90Engine Electrical System — 58Emission Control System — 24Engine Control System/Fuel System — 114Drive Shaft and Axle — 15Suspension System — 35Steering — 19Restraints — 50Brake System — 54Body (Interior and Exterior) — 213Body Electrical System — 241Heating, Ventilation, and Air Conditioning — 56DCT (Dual Clutch Transmission) System — 52
4steps
~24min
2/5difficulty
Done 0 of 4

Replacement
  • When prying with a flat-tip screwdriver or a trim tool, wrap the tool with protective tape and apply protective tape to the surrounding parts to prevent damage.
  • Use a plastic panel removal tool to remove the interior trim parts so as not to damage the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Using a flat-tip screwdriver or trim removal tool, remove the crash pad side cover [RH] (A).
  2. Loosen the mounting screws, then remove the passenger side garnish (A).
  3. Loosen the mounting screw, then remove the crash pad garnish [RH] (A).
  4. Install in the reverse order of removal.
    • Replace any damaged clips.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.