Body (Interior and Exterior)

Crash Pad Under Cover Repair Procedures

3steps
~18min
2/5difficulty
Done 0 of 3

Replacement

  • Wear gloves to protect your hands.
  • Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage.
  • Use a plastic panel removal tool to remove the interior trim parts so as not to damage the surface.
  • Be careful not to bend or scratch the trim and panels.
  1. Using a flat-tip screwdriver or trim removal tool, remove the under cover [RH] (A).
  2. Disconnect the under lamp connector (A).
  3. Install in the reverse order of removal.
    • Make sure the connector is properly connected.
    • Replace any damaged clips.

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.