Cooling Fan Repair Procedures

Removal and Installation

1. 1
   Disconnect the battery terminals.
2. 2
   Remove the under cover. (See Engine and Transaxle Assembly - Engine Room Under Cover)
3. 3
   Disconnect the air duct (A).

   

4. 4
   Disconnect the cooling fan connector (A).

   

5. 5
   Disconnect the vacuum hose (A).

   

6. 6
   Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")
7. 7
   Remove the intake shield (A).

   Tightening torque: 7.8 ~ 9.8 N·m

   

8. 8
   Loosen the mounting bolts and remove the cooling fan (A).

   Tightening torque: 7.8 ~ 9.8 N·m

   

9. 9
   Install in the reverse order of removal.
10. 10
    Disconnect the cooling fan connector (A).

    

11. 11
    Remove the resistor (A) from the cooling fan shroud.

    Tightening torque: 1.8 ~ 2.4 N·m

    

12. 12
    Install in the reverse order of removal.
13. 13
    Remove the cooling fan (A) from the cooling fan assembly.

    Tightening torque: 5.2 ~ 7.5 N·m

14. 14
    Remove the cover of the cooling fan motor (A).

    Tightening torque: 2.1 ~ 3.6 N·m

    

15. 15
    Remove the cooling fan motor (A).

    Tightening torque: 3.7 ~ 4 N·m

    

16. 16
    Install in the reverse order of removal.

Inspection

1. 1
   Disconnect the fan motor connector from the resistor.
2. 2
   Connect battery voltage to the "+" terminal and ground to the "-" terminal.
3. 3
   Check that the cooling fan motor operates properly.