Power Door Lock Switch Repair Procedures

Inspection

1. 1
   The body electrical system can be quickly diagnosed for faulty parts using the Global Diagnostic System (GDS). The GDS provides the following information.

   1. Self-Diagnosis: Diagnostic Trouble Code (DTC) check and display
   2. Current Data: Check the system input/output status.
   3. Actuation Test: Check the system operating status
   4. Additional Functions: Other Controls such as System Option and Zero Point
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select "Body Control Module (BCM)" to check the driver seat or the Door Module Assist (DDM/ADM).
4. 4
   Select the "Current Data" menu to check the current input/output status. The input/output data for the sensors related to the driver seat or assist door module (DDM/ADM) can be checked.

   

5. 5
   If you force-check the power door lock operation, select "Activation Check".

Removal

Be careful not to scratch the door trim and other parts. Handle with care during storage and during disassembly/assembly, as it is easily contaminated by grease and oil.

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the front door trim panel. (Refer to Body - "Front Door Trim")
3. 3
   Remove the power window switch assembly by releasing the mounting clips.

   

   

   Replace all damaged clips.

Installation

1. 1
   Install the power window switch assembly.
2. 2
   Install the front door trim panel after connecting the connector.
3. 3
   Connect the negative (-) battery terminal.