Power Seat Control Switch Repair Procedures

Inspection

1. 1
   The body electrical system can be quickly diagnosed for faulty parts using the Global Diagnostic System (GDS). The GDS provides the following information.

   1. Self-Diagnosis: Diagnostic Trouble Code (DTC) check and display
   2. Current Data: Check the system input/output status.
   3. Actuator Test: Checking System Operating Status
   4. Additional Functions: Other controls such as system option and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select "Power Seat Module (PSM)" to check the power seat module (PSM).
4. 4
   Select the "Current Data" menu to check the current input/output status. Input/output for sensors related to the power seat module (PSM) can be checked.
5. 5
   With the power seat switch in each position, check that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch.

   

   [Manual Seat Switch]

   

   [Power Seat Control Switch]

   

   

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the front seat outer cover. (Refer to Body - "Front Seat Outer Cover")
3. 3
   Remove the power seat control switch (A) after loosening the screws.

   

Installation

1. 1
   Install the power seat control switch after connecting the connector.
2. 2
   Install the front seat outer cover.
3. 3
   Connect the negative (-) battery terminal.