Cushion rod inspection

Refer to “cushion rod removal and installation” .

1. 1
   Remove the collar and spacer from the cushion rod.
2. 2
   Inspect the collar and spacer for any flaws or other damage. If any defects are found, replace it with a new one.

   

1. 1
   Insert the collar and spacer into bearing.
2. 2
   Check the play by moving the collar and spacer up and down. If excessive play is noted, replace the bearing with a new one. Refer to “cushion rod bearing removal and installation” .

   

Inspect the cushion rod for damage. If any defects are found, replace the cushion rod with a new one.