Rear shock absorber inspection

Refer to “rear shock absorber removal and installation” .

Inspect the rear shock absorber for damage and oil leakage, and absorber bushing for wear and damage. If any defect is found, replace the rear shock absorber with a new one.

do not attempt to disassemble the rear shock absorber. It is unserviceable.

1. 1
   Remove the spacer from the cushion lever.
2. 2
   Inspect the spacer for any flaws or other damage. If any defect is found, replace the spacer with a new one.

   

1. 1
   Insert the spacer into bearing.
2. 2
   Check the play by moving the spacer up and down. If excessive play is noted, replace the bearing with a new one. Refer to “rear shock absorber removal and installation” .