Front Door Speaker
Removal REMOVAL CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
.gif)
2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH
.gif)
3. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP LH
.gif)
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
.gif)
5. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
(a) Disconnect the speaker connector. |
![]() |
(b) Remove the 4 screws.
(c) Detach the 2 claws and remove the speaker.
NOTICE:
Do not touch the cone of the speaker.
Inspection INSPECTION PROCEDURE1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 8 Speakers)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the speaker assembly. Text in Illustration
|
![]() |
2. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 9 Speakers)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the speaker assembly. Text in Illustration
|
![]() |
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
(a) Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.
(b) Install the speaker with the 4 screws.
Torque:
2,5 N·m {25 kgf·cm, 22 in·lbf}
NOTICE:
Do not touch the cone of the speaker.
(c) Connect the connector.
2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH
.gif)
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
.gif)
4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH
.gif)
5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
.gif)
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.

.png)