Satellite Radio Antenna

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE ROOF HEADLINING ASSEMBLY

(See page )

3. REMOVE SATELLITE RADIO ANTENNA ASSEMBLY

(a) Disconnect the connector.

(b) Remove the bolt, washer and holder and satellite radio antenna assembly.

(c) Disengage the 3 claws and 3 guides to remove the satellite radio antenna assembly from outer antenna cover.

(d) When reusing the roof antenna assembly: (1) Remove the seal.

1. INSTALL SATELLITE RADIO ANTENNA ASSEMBLY

(a) When reusing the roof antenna assembly:

(1) Install a new seal.

(b) Engage the 3 guides and 3 claws to install the satellite radio antenna assembly to outer antenna cover.

(c) Temporarily install the satellite radio antenna assembly on the vehicle.

(d) Install a new washer and holder with the bolt.

Torque:

9,5 N·m {97 kgf·cm, 84 in·lbf}

(e) Connect the connector.

2. INSTALL ROOF HEADLINING ASSEMBLY

(See page )

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

4. CHECK SRS WARNING LIGHT

(See page )