Instrument Panel Speaker

Components COMPONENTS ILLUSTRATION
Removal REMOVAL CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT PILLAR GARNISH LH

2. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

3. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

(a) Remove the 2 screws.

Text in Illustration

*A

for 9 Speakers

*B

for 8 Speakers

(b) Disconnect the connector to remove the front No. 2 speaker assembly.

NOTICE:

Do not touch the cone of the front No. 2 speaker assembly.

4. REMOVE NO. 1 SPEAKER MOUNTING BRACKET (for 8 Speakers)

(a) Remove the 2 bolts and No. 1 speaker mounting bracket.

Inspection INSPECTION PROCEDURE

1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

(a) Temporarily replace the front No. 2 speaker assembly with a new or normally functioning one.

OK:

Malfunction disappears.

Installation INSTALLATION CAUTION / NOTICE / HINT

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL NO. 1 SPEAKER MOUNTING BRACKET (for 8 Speakers)

(a) Install the No. 1 speaker mounting bracket with the 2 bolts.

Torque:

2,5 N·m {25 kgf·cm, 22 in·lbf}

2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

(a) Connect the connector.

(b) Align the positioning pins of the front No. 2 speaker assembly with the instrument panel sub-assembly to temporarily install the front No. 2 speaker assembly.

Text in Illustration

*A

for 9 Speakers

*B

for 8 Speakers

(c) Install the front No. 2 speaker assembly with the 2 screws.

Torque:

2,5 N·m {25 kgf·cm, 22 in·lbf}

NOTICE:

• Do not touch the cone of the front No. 2 speaker assembly.
• When installing the front No. 2 speaker assembly to the instrument panel sub-assembly, be careful that the wires do not get caught between the parts.

3. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

4. INSTALL FRONT PILLAR GARNISH LH