Toyota 4Runner Quiz
Drivetrain

Inspection

In this manual: Drivetrain
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
INSPECTION PROCEDURE

1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition
  • 2 (RB) - 6 (PL)
  • 4 (B) - 5 (L)

Shift lever in P

Below 1 Ω

2 (RB) - 1 (RL)

Shift lever in R

Below 1 Ω
  • 2 (RB) - 9 (NL)
  • 4 (B) - 5 (L)

Shift lever in N

Below 1 Ω

2 (RB) - 7 (DL)
  • Shift lever in D
  • Shift lever in S, "+" or "-"

Below 1 Ω
  • 2 (RB) - 6 (PL)
  • 4 (B) - 5 (L)

Shift lever not in P

10 kΩ or higher

2 (RB) - 1 (RL)

Shift lever not in R

10 kΩ or higher
  • 2 (RB) - 9 (NL)
  • 4 (B) - 5 (L)

Shift lever not in N

10 kΩ or higher

2 (RB) - 7 (DL)
  • Shift lever not in D
  • Shift lever not in S, "+" or "-"

10 kΩ or higher
Text in Illustration

*1

Component without harness connected

(Park/Neutral Position Switch)

If the result is not as specified, replace the switch.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.