Toyota 4Runner Quiz
Vehicle Exterior

Installation

In this manual: Vehicle Exterior
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
010203040501612N·mlb·ft
Tightening torque found on this page
INSTALLATION CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.
PROCEDURE

1. INSTALL POWER LIFT STEP ASSEMBLY

(a) Install the power lift step assembly with the 2 nuts and 4 bolts.

Torque:

16 N·m {163 kgf·cm, 12 ft·lbf}

(b) Connect the connector.

2. INSTALL STEP PLATE

(a) Open the door and deploy the side auto step fully.

(b) Using a 5 mm hexagon wrench, install the step plate with the 4 hexagon bolts.

Torque:

12 N·m {122 kgf·cm, 9 ft·lbf}

HINT:

After replacing the power lift step assembly with a new one, install the step plate, and then cut off the clamp with the power lift step assembly extended.

Text in Illustration

*1

Clamp

3. INSTALL ROCKER PANEL MOULDING (w/ Intuitive Parking Assist System)

(See page )

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.