Vehicle Exterior
Installation
In this manual: Vehicle Exterior
~1min read
INSTALLATION PROCEDURE
.gif)
.gif)
.gif)
.gif)
.gif)
1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR
(a) Attach the 2 claws to install the sensor. |
![]() |
(b) Connect the connector.
2. INSTALL NO. 3 HEATER TO REGISTER DUCT
.gif)
3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
.gif)
4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
.gif)
5. INSTALL NO. 1 HEATER TO REGISTER DUCT
.gif)
6. INSTALL NO. 2 HEATER TO REGISTER DUCT
.gif)
7. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(a) Install the instrument panel sub-assembly (See page
).
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
