Installation

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure listed below is for the LH side.

1. INSTALL FRONT BUMPER BAR REINFORCEMENT LH (w/o Intuitive Parking Assist System)

(a) Install the front bumper bar reinforcement LH with the 3 screws.

2. INSTALL FRONT BUMPER BAR REINFORCEMENT LH (w/ Intuitive Parking Assist System)

(a) Install the front bumper bar reinforcement LH with the 2 screws.

3. INSTALL HEADLIGHT ASSEMBLY LH

(a) Connect the 4 connectors and install the headlight assembly LH.

(b) Install the 3 screws and bolt.

Torque:

5,5 N·m {56 kgf·cm, 49 in·lbf}

4. INSTALL FRONT BUMPER COVER (w/o Intuitive Parking Assist System)

(See page )

5. INSTALL FRONT BUMPER COVER (w/ Intuitive Parking Assist System)

(See page )

6. INSTALL FRONT FENDER MAIN SEAL LH

7. INSTALL FRONT FENDER MAIN SEAL RH

HINT:

Use the same procedure as for the LH side.

8. INSTALL UPPER RADIATOR SUPPORT SEAL

9. ADJUST HEADLIGHT AIMING

(See page )

10. ADJUST FOG LIGHT AIMING

(See page )