Installation

1. INSTALL TURN SIGNAL FLASHER ASSEMBLY

(a) Install the turn signal flasher assembly with the nut.

Torque:

5,5 N·m {56 kgf·cm, 49 in·lbf}

(b) Connect the connector.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

3. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

4. INSTALL NO. 2 SWITCH HOLE BASE

5. INSTALL COWL SIDE TRIM BOARD LH

6. INSTALL DOOR SCUFF PLATE ASSEMBLY LH