Ptc Heater Assembly

1. REMOVE AIR CONDITIONING UNIT

(a) Remove the air conditioning unit (See page ).

2. REMOVE QUICK HEATER ASSEMBLY

(a) Detach the 2 clamps.

(b) Remove the 2 screws and quick heater.

1. INSPECT QUICK HEATER ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition A-1 - B-1 23 to 25 °C 0.5 to 2.5 Ω A-2 - B-1 23 to 25 °C 0.5 to 2.5 Ω A-2 - B-2 23 to 25 °C 0.5 to 2.5 Ω A-3 - B-2 23 to 25 °C 0.5 to 2.5 Ω If the result is not as specified, replace the quick heater assembly. Text in Illustration *1 Connector A *2 Connector B *a Component without harness connected (Quick Heater Assembly)

1. INSTALL QUICK HEATER ASSEMBLY

(a) Attach the 2 clamps to install the quick heater.

(b) Install the 2 screws.

2. INSTALL AIR CONDITIONING UNIT

(a) Install the air conditioning unit (See page ).