Toyota 4Runner Quiz
Vehicle Interior

Relay(for Magnet Clutch Control)

In this manual: Vehicle Interior
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE

1. REMOVE MAGNET CLUTCH RELAY

(a) Remove the magnet clutch relay from the engine room relay block.

Text in Illustration

*1

Magnet Clutch Relay

2. INSPECT MAGNET CLUTCH RELAY


(a) Measure the resistance of the according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

3 - 5

Battery voltage not applied between terminals 1 and 2

10 kΩ or higher

Battery voltage applied to terminal 1 and 2

Below 1 Ω
  • If the result is not as specified, replace the relay.

3. INSTALL MAGNET CLUTCH RELAY

(a) Install the magnet clutch relay to the engine room relay block.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.