Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH

3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

4. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH

5. REMOVE REAR SPEAKER ASSEMBLY

6. REMOVE REAR DOOR SERVICE HOLE COVER LH

7. REMOVE REAR DOOR GLASS RUN LH

8. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY LH

9. REMOVE REAR DOOR QUARTER WINDOW GLASS LH

10. REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH

11. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY LH

12. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

(a) Using a T25 "TORX" socket wrench, remove the 3 screws and power window regulator motor.