Toyota 4Runner Quiz
Audio / Visual / Telematics

Removal

In this manual: Audio / Visual / Telematics
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
REMOVAL PROCEDURE

1. REMOVE JACK BOX HOLE COVER


2. REMOVE REAR QUARTER PANEL MUDGUARD LH


3. REMOVE REAR QUARTER PANEL MUDGUARD RH

HINT:

Use the same procedure as for the LH side.

4. REMOVE REAR BUMPER COVER


5. REMOVE NO. 3 FLOOR WIRE


6. REMOVE NO. 1 ULTRASONIC SENSOR

(a) Detach the 2 claws to remove the No. 1 ultrasonic sensor from the ultrasonic sensor retainer.

HINT:

Use the same procedure as for the other side.

7. REMOVE ULTRASONIC SENSOR CLIP

(a) Using a screwdriver, detach the claw to remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor as shown in the illustration.

Text in Illustration

*1

Protective Tape

HINT:

  • Tape the screwdriver tip before use.
  • Use the same procedure as for the other side.

8. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

(a) Detach the 3 claws to remove the No. 2 ultrasonic sensor retainer from the rear bumper cover.

HINT:

Use the same procedure as for the other side.

9. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

(a) Detach the 4 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.

HINT:

Use the same procedure as for the other side.

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.