Maintenance data (fuel, oil level, etc.)

Dimensions

*1: Vehicle empty
*2: Vehicles with raised ride height

Vehicle Identification Number

The Vehicle Identification Number (VIN) or chassis number is the official identifier of each vehicle. This is the primary identification number for your Toyota. It is used for vehicle ownership registration.

This number is stamped under the front right seat.

3-door models

This number is also located on the manufacturer's label on the right-hand center pillar.

5-door models

This number is also located on the manufacturer's label on the right-hand rear pillar.

Fuel

Lubrication system

1KR engine

*: The engine oil capacity is a reference quantity for oil changes. Bring the engine to operating temperature, then stop it, wait more than 5 minutes and check the oil level on the dipstick.

■ Selecting engine oil Your Toyota vehicle was filled with "Toyota Genuine Motor Oil". Toyota recommends using approved "Toyota Genuine Motor Oil". Other engine oil of equivalent quality may also be used.

Oil grade: 0W-20, 5W-30 and 10W-30: API grade SL "Energy-Conserving", SM "Energy-Conserving" or SN "Resource-Conserving" engine oil, or ILSAC 15W-40: API grade SL, SM or SN multigrade engine oil

Recommended viscosity (SAE): Your Toyota vehicle is filled at the factory with SAE 0W-20, the best choice for good fuel economy and for avoiding starting problems in low outside temperatures.

If SAE 0W-20 oil is not available, SAE 5W-30 may be used. In any case, it should be replaced with SAE 0W-20 at the next oil change.

If engine oil with SAE 10W-30 or higher viscosity is used in extremely low temperatures, starting problems may occur. Therefore, use engine oil with SAE 0W-20 or 5W-30 viscosity.

Oil viscosity (0W-20 shown as an example):

• The 0W value in 0W-20 indicates the oil's cold-start characteristic. Oils with a lower number before the W allow the engine to start more easily in cold conditions.
• The 20 in 0W-20 indicates the oil's viscosity characteristic at high temperatures. A higher viscosity grade (that is, a higher viscosity value) is especially suitable for vehicles driven at high speeds or under heavy loads.

How to read the oil container labels: Some oil containers show one or both API marks to make them easy to identify.

1. API Service Symbol Upper part: "API SERVICE SN" indicates the oil quality according to the American Petroleum Institute (API).

Center part: "SAE 0W-20" indicates the SAE viscosity grade.

Bottom: "Resource-Conserving" means the oil has properties that help save fuel and protect the environment.

ILSAC Certification Mark The International Lubricant Specification Advisory Committee (ILSAC) certification mark is shown on the front of the container.

HM01 engine

*: The engine oil capacity is a reference quantity for oil changes. Bring the engine to operating temperature, then stop it, wait more than 5 minutes and check the oil level on the dipstick.

■ Selecting engine oil The Toyota vehicle uses "TOTAL ACTIVA 7000/9000" or "TOTAL QUARTZ 7000/9000" engine oil. Toyota recommends using approved "TOTAL ACTIVA 7000/9000" or "TOTAL QUARTZ 7000/9000" engine oil.

Other engine oil of equivalent quality may also be used.

Oil grade: 5W-40 and 10W-40: API grade SL "Energy-Conserving" or SM "Energy-Conserving"

Recommended viscosity (SAE): If engine oil with SAE 10W-40 or higher viscosity is used in extremely low temperatures, starting problems may occur.

Therefore, use engine oil with SAE 5W-40 viscosity.

Oil viscosity (5W-40 shown as an example):

• The 5W value in 5W-40 indicates the oil's cold-start characteristic. Oils with a lower number before the W allow the engine to start more easily in cold conditions.
• The 40 in 5W-40 indicates the oil's viscosity characteristic at high temperatures. A higher viscosity grade (that is, a higher viscosity value) is especially suitable for vehicles driven at high speeds or under heavy loads.

How to read the oil container labels: Some oil containers show the API mark to make them easy to identify.

API Service Symbol

Upper part: "API SERVICE SM" indicates the oil quality according to the American Petroleum Institute (API).

Center part: "SAE 5W-40" indicates the SAE viscosity grade.

Bottom: "Energy-Conserving" means the oil has properties that help save fuel and protect the environment.

Cooling system

1KR engine

*: The identification code is shown at the locations illustrated in the figure.

HM01 engine

NOTE

■ To prevent serious engine damage Do not mix "Toyota Super Long Life Coolant" with "Toyota Genuine Premium Long Life Coolant 2WZ-TV".

Electrical system

Manual transmission (including front differential)

1KR engine

HM01 engine

NOTE

■ Manual transmission oil (1KR engine) Please note that, depending on the specific characteristics of the transmission oil used or operating conditions, idle noise, gear-shift feel and/or fuel economy may differ or be altered. For optimum performance, Toyota recommends the use of "TOYOTA Genuine Manual Transmission Gear Oil LV".

Brakes

*1: Minimum pedal distance when depressed with a force of 300 N while the engine is running.
*2: Travel of the parking brake lever when pulled up with a force of 196 N.

Steering

Tires and wheels

14-inch tires (type A)*

14-inch tires (type B)*

15-inch tires

Temporary spare wheels (if equipped)

*: The tire inflation pressure is shown on the driver's side center pillar.

Bulbs

A: HIR2 halogen bulbs
B: H16 halogen bulbs
C: Single-contact bulbs (clear)
D: Single-contact bulbs (amber)
E: Wedge-base bulbs (clear)
F: Double-contact bulbs (clear)

*: If equipped