Exterior Panels / Trim
Disassembly
In this manual: Exterior Panels / Trim
~1min read
DISASSEMBLY
PROCEDURE
1. REMOVE HOOD TO RADIATOR GRILLE SEAL
(a) Release the clips to remove the hood to radiator grille seal. |
![]() |
2. REMOVE INNER RADIATOR GRILLE
(a) Remove the 2 screws. |
![]() |
(b) Release the claws to remove the inner radiator grille.
(c) Remove the 6 nuts. |
![]() |
3. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
(a) Apply protective tape around the spring nut.
![]() |
Protective tape |
(b) Using a screwdriver, pry out the 2 spring nuts as shown in the illustration. |
|
(c) Using cutting pliers (side cutters), cut the 2 spring nuts at the locations shown in the illustration and remove them. |
|
(d) Release the claws and guides to remove the radiator grille (or front panel) emblem. |
![]() |
Was this page helpful?



.png)


