Brakes (Front)

Disassembly

~2min read

DISASSEMBLY

PROCEDURE

1. REMOVE FRONT DISC BRAKE PISTON

(a) Place a piece of cloth between the front disc brake piston and the front disc brake caliper assembly.

*a

Rag

(b) Apply compressed air to remove the front disc brake piston from the front disc brake caliper assembly.

CAUTION:

  • Do not hold the front disc brake caliper assembly with any part of your hand between the caliper assembly and the front disc brake piston.
  • Do not place any part of your hand in front of the front disc brake piston when using compressed air, as this may cause serious injury.

NOTICE:

Avoid splashing brake fluid.

2. REMOVE CYLINDER BOOT

(a) Remove the cylinder boot from the front disc brake caliper assembly.

NOTICE:

Be careful not to damage the front disc brake caliper assembly.

*a

Protective tape

3. REMOVE PISTON SEAL

(a) Using a screwdriver with its tip wrapped in tape, remove the piston seal from the front disc brake wheel cylinder assembly.

NOTICE:

Do not damage the inner surface of the cylinder or the piston seal groove of the front disc brake wheel cylinder assembly.

*a

Protective tape

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

(a) Remove the cap from the front disc brake bleeder plug.

5. REMOVE FRONT DISC BRAKE BLEEDER PLUG

(a) Remove the front disc brake bleeder plug from the front disc brake wheel cylinder assembly.