Reassembly
REASSEMBLY
PROCEDURE
1. TEMPORARILY INSTALL FRONT DISC BRAKE BLEEDER PLUG
(a) Temporarily install the front disc brake bleeder plug to the front disc brake wheel cylinder assembly.
HINT:
Fully tighten the front disc brake bleeder plug after bleeding the system.
2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP
(a) Install the front disc brake bleeder plug cap to the front disc brake bleeder plug.
3. INSTALL PISTON SEAL
(a) Apply lithium soap based glycol grease to the entire circumference of a new piston seal.
![]() |
Lithium soap base glycol grease |
(b) Install the piston seal to the front disc brake wheel cylinder. NOTICE: Install the piston seal correctly in the groove of the front disc brake wheel cylinder. |
|
4. INSTALL FRONT DISC BRAKE PISTON
(a) Apply a thin coat of lithium soap based glycol grease to the entire circumference of a new cylinder boot.
*1 |
Cylinder Boot |
*2 |
Front Disc Brake Piston |
![]() |
Lithium soap base glycol grease |
(b) Apply a light coat of lithium soap base glycol grease to the sliding surfaces of the front disc brake piston.
(c) Install the cylinder boot to the front disc brake piston.
NOTICE:
Install the cylinder boot correctly in the groove of the front disc brake piston.
(d) Install the front disc brake piston to the front disc brake wheel cylinder assembly.
NOTICE:
Do not force the front disc brake piston into the front disc brake wheel cylinder.
5. INSTALL CYLINDER BOOT
(a) Using the SST and a hammer, install the cylinder boot to the front disc brake wheel cylinder. SST: 09550-00032 NOTICE:
|
|
.png)

