Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
(a) Secure the brake master cylinder sub-assembly in a vise.
NOTICE:
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
(b) Using a TORX T20 socket wrench, remove the TORX screw and the brake master cylinder reservoir assembly from the brake master cylinder body. NOTICE: Do not drop the brake master cylinder reservoir assembly. |
![]() |
(c) Remove the brake master cylinder body from the vise.
(d) Release the claw to remove the wire harness clamp.
2. REMOVE BRAKE MASTER CYLINDER RESERVOIR GROMMET
(a) Remove the 2 brake master cylinder reservoir grommets from the brake master cylinder reservoir assembly.
3. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
(a) Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.
4. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
(a) Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.
