Wiper / Washer

Removal

~2min read

REMOVAL

PROCEDURE

1. REMOVE LOWER STEERING COLUMN COVER

NOTICE:

If the lower steering column cover is not removed in the specified order, parts may break.

(a) Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

(b) Lock the tilt and telescopic lever.

(c) Turn the steering wheel assembly to the left and remove the screw.

(d) Turn the steering wheel assembly to the right and remove the screw.

(e) Press the lower steering column cover and release the claws as shown in the illustration.

Push in

(f) Release the claws.

(g) Release the tilt and telescope adjustment lever, then fully extend and raise the steering column assembly.

(h) Lock the tilt and telescope adjustment lever.

(i) Pull the lower steering column cover toward the rear of the vehicle to release the claw, then remove the lower steering column cover.

Place hands here

Remove in this direction

2. REMOVE UPPER STEERING COLUMN COVER

(a) Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.

(b) Lock the tilt and telescopic lever.

(c) Release the claw to remove the upper steering column cover, as shown in the illustration.

Detach in this direction

(d) Release the claws and clips to remove the upper steering column cover from the lower instrument panel cover sub-assembly.

3. REMOVE FRONT WIPER SWITCH ASSEMBLY

(a) Disconnect the 2 connectors.

(b) Using a screwdriver with its tip wrapped in protective tape, release the claw and remove the front wiper switch assembly, as shown in the illustration.

*a

Protective tape

Remove in this direction

NOTICE:

If a claw is pulled excessively, it may break.