Removal
REMOVAL
PROCEDURE
1. REMOVE RH FRONT WHEEL
Click here
![]()
2. REMOVE FRONT WHEEL HOUSE EXTENSION PAD RH
(a) Remove the 5 screws and the RH front wheel house extension pad. |
![]() |
3. REMOVE RH FRONT FENDER MOULDING SUB-ASSEMBLY
Click here![]()
4. REMOVE RH ROCKER PANEL MOULDING
Click here![]()
5. REMOVE RH FRONT FENDER LINER
(a) Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin retainers. |
![]() |
(b) Remove the 6 screws, 6 clips and the RH front fender liner.
6. DRAIN WASHER FLUID
(a) Disconnect the rear washer hose from the front washer pump and motor assembly, and drain the washer fluid. HINT: Collect the washer fluid in a container. |
![]() |
7. REMOVE FRONT WASHER PUMP AND MOTOR ASSEMBLY
(a) Disconnect the washer hose.
![]() |
Remove in this direction |
(b) Disconnect the connector.
(c) Remove the front washer pump and motor assembly as shown in the illustration.



.png)