Installation
INSTALLATION
PROCEDURE
1. INSTALL FRONT WASHER PUMP AND MOTOR ASSEMBLY
(a) Install the washer pump and motor assembly, as shown in the illustration.
![]() |
Install in this direction |
(b) Connect the connector.
(c) Connect the washer hose.
2. ADD WASHER FLUID
(a) Connect the rear washer hose.
(b) Add washer fluid to the washer reservoir.
3. INSTALL FRONT FENDER LINER RH
(a) Install the RH front fender liner using the 7 clips and 5 screws.
(b) Install the pin retainers as shown in the illustration. NOTICE: Insert each pin retainer using the vertically aligned groove. Do not turn the pin retainer after inserting it. After installation, make sure the groove is aligned vertically. |
![]() |
4. INSTALL RH ROCKER PANEL MOULDING
Click here![]()
5. INSTALL FRONT FENDER MOULDING ASSY RH
Click here![]()
6. INSTALL RH FRONT WHEEL HOUSE EXTENSION PAD
(a) Install the RH front wheel house extension pad with the 5 screws.
7. INSTALL FRONT WHEEL RH
Click here
![]()
.png)
