Seats

Removal

~3min read

REMOVAL

PRECAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp edges on parts may cause injury to your hands.

PROCEDURE

1. REMOVE REAR SEAT HEADREST ASSEMBLY (for Right Side)

(a) Remove the rear seat headrest assembly.

2. REMOVE REAR SEAT HEADREST ASSEMBLY (for Left Side)

(a) Remove the rear seat headrest assembly.

3. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (for Right Side)

(a) Remove the rear seat center headrest assembly.

4. DISCONNECT REAR CENTER SEAT BELT OUTER BELT ASSEMBLY

(a) Using a screwdriver with its tip wrapped in protective tape, disconnect the rear center seat belt outer belt assembly as shown in the illustration.

*a

Protective tape

Insert screwdriver here

5. REMOVE REAR SEAT BACK ASSEMBLY RH

(a) Fold the right rear seatback assembly forward.

(b) Release the buckle fixing devices.

*a

Buckle Fixing Device

(c) Remove the 2 bolts.

(d) Release the guides to remove the rear seat back assembly RH.

NOTICE:

Take care not to damage the vehicle body.

6. REMOVE REAR SEAT BACK ASSEMBLY LH

(a) Fold the rear seat back assembly LH forward.

(b) Release the buckle fixing devices.

*a

Buckle Fixing Device

(c) Remove the 2 bolts.

(d) Release the guides to remove the rear seat back assembly LH.

NOTICE:

Take care not to damage the vehicle body.

7. REMOVE REAR SEAT CUSHION ASSEMBLY (BENCH TYPE)

(a) Lift up the front edge of the bench-type rear seat cushion assembly, as shown in the illustration, and release the rear seat cushion frame hooks at the front of the bench-type rear seat cushion assembly from the rear seat cushion lock hooks.

NOTICE:

Be sure to place the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting. Lifting another part of the cushion may deform the rear seat cushion frame.

*a

Front side rear seat cushion frame hook

*b

Rear side rear seat cushion frame hook

Place hands here

Remove in this direction (1)

Remove in this direction (2)

Standard measurement:

Area

Measurement

A

10 mm (0.394 in.)

(b) Release the rear seat cushion frame hook at the rear of the bench-type rear seat cushion assembly, as shown in the illustration.

NOTICE:

Take care not to damage the vehicle body.

8. REMOVE REAR SEAT CUSHION LOCK HOOK

(a) Release the claws to remove the rear seat cushion lock hook, as shown in the illustration.

Remove in this direction

HINT:

Repeat the same procedure for the right side and the left side.