Seats

Reassembly

~7min read
010203040503022N·mlb·ft
Tightening torque found on this page

REASSEMBLY

PRECAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp edges on parts may cause injury to your hands.

PROCEDURE

1. INSTALL REAR SEAT CUSHION COVER (BENCH TYPE)

NOTICE:

When installing a bench type rear seat cushion cover, refer to the precautions to avoid wrinkles.

Click here

(a) Engage the claws to install the bench type rear seat cushion cover on the No. 1 rear seat cushion pad sub-assembly.

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.

(b) Install the rear seat cushion pad on the No. 1 rear seat cushion pad sub-assembly.

(c) without occupant classification system:

(1) Engage the hooks and the buckle fixing device to install the bench type rear seat cushion cover.

*a

Buckle Fixing Device

-

-

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.

(d) with occupant classification system:

(1) Engage the hooks and the buckle fixing device to install the bench type rear seat cushion cover.

*a

Buckle Fixing Device

-

-

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.

2. INSTALL NO. 2 REAR SEAT CUSHION COVER GARNISH (with occupant classification system)

(a) Install the No. 2 rear seat cushion cover garnish with 3 screws.

3. INSTALL NO. 1 REAR SEAT CUSHION COVER GARNISH (with occupant classification system)

HINT:

Perform the same procedure for the No. 1 seat cushion cover garnish and the No. 2 seat cushion cover garnish.

4. INSTALL LH REAR DOOR SCUFF PLATE (with occupant classification system)

(a) Engage the claws to install the LH rear door scuff plate.

5. INSTALL RH REAR DOOR SCUFF PLATE (with occupant classification system)

HINT:

Repeat the same procedure for the right side and the left side.

6. INSTALL LH REAR SEAT BACK LOCK ASSEMBLY (for LH side)

(a) Engage the guides to install the LH rear seat back lock assembly.

(b) Install the 2 bolts.

Torque:

30 N·m {306 kgf·cm, 22 ft·lbf}

7. INSTALL SEPARATE TYPE REAR SEAT BACK COVER (for LH side)

NOTICE:

When installing a separate type rear seat back cover, refer to the precautions to avoid wrinkles.

Click here

(a) Engage the claws to install the separate type rear seat back cover on the separate type LH rear seat back pad.

NOTICE:

Be careful not to damage the separate type rear seat back cover.

8. INSTALL SEPARATE TYPE REAR SEAT BACK COVER WITH PAD (for LH side)

(a) Install the separate type rear seat back cover with pad on the LH rear seat back frame sub-assembly.

9. INSTALL REAR SEAT HEADREST SUPPORT (for LH side)

(a) without Occupant Classification System:

(1) Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.

Install in this direction

(b) with Occupant Classification System:

Install in this direction

(1) Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.

10. INSTALL LH REAR SEAT BACK PANEL SUB-ASSEMBLY (for LH side)

(a) Engage the guides and claws to install the LH rear seat back panel sub-assembly.

(b) Close the 2 fixing devices as shown in the illustration.

*a

Fastener

(c) Engage the hook.

11. INSTALL REAR SEAT BACK LOCK DEVICE GARNISH (for LH side)

(a) Engage the hooks to detach the separate type rear seat back cover.

(b) Engage the claws to install a new rear seat back lock device garnish.

12. INSTALL RH REAR SEAT BACK LOCK ASSEMBLY (for RH side)

(a) Engage the guides to install the RH rear seat back lock assembly.

(b) Install the 2 bolts.

Torque:

30 N·m {306 kgf·cm, 22 ft·lbf}

13. INSTALL CENTER REAR SEAT BELT OUTER BELT ASSEMBLY (for RH side)

Click here

14. INSTALL SEPARATE TYPE REAR SEAT BACK COVER (for RH side)

NOTICE:

When installing a separate type rear seat back cover, refer to the precautions to avoid wrinkles.

Click here

(a) Engage the claws to install the separate type rear seat back cover on the separate type RH rear seat back pad.

NOTICE:

Be careful not to damage the separate type rear seat back cover.

15. INSTALL SEPARATE TYPE REAR SEAT BACK COVER WITH PAD (for RH side)

(a) Pass the center rear seat belt outer belt assembly through the separate type rear seat back cover with pad, and temporarily install the separate type rear seat back cover with pad on the RH rear seat back frame sub-assembly as shown in the illustration.

16. INSTALL CENTER REAR SEAT HEADREST SUPPORT (for RH side)

(a) Engage the claws to install the 2 center rear seat headrest supports as shown in the illustration.

Install in this direction

17. INSTALL REAR SEAT HEADREST SUPPORT (for RH side)

(a) without Occupant Classification System:

(1) Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.

Install in this direction

(b) with Occupant Classification System:

(1) Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.

Install in this direction

18. INSTALL RH REAR SEAT BACK PANEL SUB-ASSEMBLY (for RH side)

(a) Engage the guides and claws to install the RH rear seat back panel sub-assembly.

(b) Close the 2 fixing devices as shown in the illustration.

*a

Fastener

(c) Engage the hook.

19. INSTALL REAR SEAT BACK LOCK DEVICE GARNISH (for RH side)

(a) Engage the hooks to detach the separate type rear seat back cover.

(b) Engage the claws to install a new rear seat back lock device garnish.

20. INSTALL REAR SEAT BACK SIDE BELT HOLE COVER (for RH side)

(a) Install the rear seat belt hole cover.

21. INSTALL SEAT BELT ANCHOR COVER PLUG (for RH side)

(a) Engage the guides to install the seat belt anchor cover plug as shown in the illustration.

Install in this direction

(b) Engage the guides and claws to install the rear seat back side belt cover with the seat belt anchor cover plug as shown in the illustration.

Install in this direction (1)

Install in this direction (2)