Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 1 ENGINE UNDER COVER
Click here
![]()
2. REMOVE REAR LEFT ENGINE UNDER COVER
Click here
![]()
3. REMOVE NO. 2 VALVE COVER
Click here![]()
4. REMOVE RADIATOR COVER
Click here
![]()
5. REMOVE NO. 1 AIR CLEANER INLET
Click here
![]()
6. REMOVE AIR CLEANER COVER WITH AIR CLEANER HOSE
Click here
![]()
7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
Click here
![]()
8. DISCONNECT CONTROL CABLE ASSEMBLY
(a) Place the shift lever in the N position.
(b) Remove the nut and disconnect the shift control cable assembly from the control shaft lever. |
![]() |
(c) Remove the clip and disconnect the shift control cable assembly from the No. 1 shift control cable bracket.
9. REMOVE PARK/NEUTRAL POSITION SWITCH
(a) Disconnect the connector. |
![]() |
(b) Remove the nut, washer and control shaft lever from the park/neutral position switch. |
![]() |
(c) Using a screwdriver, pry out the lock plate, then remove the lock nut and lock plate from the park/neutral position switch. |
![]() |
(d) Remove the 2 bolts and park/neutral position switch from the CVT transaxle assembly. |
![]() |




