Heater / Air Conditioning
Front Blower Motor (Denso Make)
In this manual: Heater / Air Conditioning
~1min read
Components
COMPONENTS
ILLUSTRATION
*1 |
BLOWER MOTOR SUB-ASSEMBLY WITH FAN |
*2 |
NO. 2 INSTRUMENT PANEL LOWER COVER SUB-ASSEMBLY |
Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 2 INSTRUMENT PANEL LOWER COVER SUB-ASSEMBLY
Click here![]()
2. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY
(a) Release the latch. |
![]() |
(b) Disconnect the connector.
(c) Remove the 3 screws and the blower motor with fan sub-assembly.
NOTICE:
Replace the blower motor and fan assembly if it has been dropped or subjected to a severe impact.
Installation
INSTALLATION
PROCEDURE
1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
(a) Install the blower motor and fan assembly using the 3 screws. NOTICE: Replace the blower motor and fan assembly if it has been dropped or subjected to a severe impact. |
![]() |
(b) Connect the connector.
(c) Engage the clip.
2. INSTALL NO. 2 INSTRUMENT PANEL LOWER COVER SUB-ASSEMBLY
Click here![]()
Was this page helpful?

.png)