Reassembly
REASSEMBLY
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedure described below applies to the LH side.
PROCEDURE
1. INSTALL OUTSIDE MOULDING RETAINER
(a) When using a new front door outside moulding:
(1) Clean the surface of the front door outside moulding.
(b) When reusing the front door outside moulding:
(1) Remove the double-sided tape from the front door outside moulding.
(2) Remove any tape residue using a cleaning solvent.
(c) Install a new outside moulding retainer.
(1) Remove the protective paper from the surface of the outside moulding retainer.
HINT:
After removing the release paper, do not let the adhesive surface come into contact with foreign matter.
(2) Install the outside moulding retainer as shown in the illustration. |
|
2. INSTALL FRONT DOOR OUTSIDE MOULDING UPPER CUSHION
(a) When using a new front door outside moulding:
(1) Clean the surface of the front door outside moulding.
(b) When reusing the front door outside moulding:
(1) Remove the double-sided tape from the front door outside moulding.
(2) Remove any tape residue using a cleaning solvent.
(c) Install a new front door outside moulding upper cushion.
(1) Remove the protective paper from the surface of the front door outside moulding upper cushion.
HINT:
After removing the release paper, do not let the adhesive surface come into contact with foreign matter.
(2) Install the front door outside moulding upper cushion as shown in the illustration. |
|

