Brake System (Other)
Reassembly
In this manual: Brake System (Other)
~1min read
REASSEMBLY
PROCEDURE
1. INSTALL VACUUM WARNING SWITCH ASSEMBLY
(a) Install a new check valve grommet to the brake booster assembly.
(b) Install the vacuum sensor assembly on the brake booster assembly, as shown in the illustration. |
|
2. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY
(a) Install a new check valve grommet to the brake booster assembly.
(b) Install the brake vacuum check valve assembly on the brake booster assembly, as shown in the illustration. |
|
Was this page helpful?
.png)
