Brake System (Other)

Inspection On Vehicle

~1min read

INSPECTION ON VEHICLE

PROCEDURE

1. INSPECT BRAKE BOOSTER ASSEMBLY

(a) Air tightness check

(1) Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.

If the pedal goes all the way down the first time, but cannot be depressed as far the 2nd or 3rd time, the brake booster assembly is airtight.

*a

Correct

*b

Incorrect

*c

1st

*d

2nd

*e

3rd

(2) Start the engine, depress the brake pedal, then stop the engine while keeping the brake pedal depressed.

If the pedal reserve travel does not change after the pedal has been held down for 30 seconds, the brake booster assembly is airtight.

(b) Operation check

(1) With the ignition switch OFF, depress the brake pedal several times and make sure that the pedal reserve travel does not change when the pedal is depressed.

(2) Depress the brake pedal and, while holding it in this position, start the engine.

If the pedal moves down slightly, the operation is normal.