Supplemental Restraint Systems

Installation

~1min read
010203040505.54N·mlb·ft
Tightening torque found on this page

INSTALLATION

PRECAUTION / NOTICE / HINT

HINT:

  • Perform the same procedure for the driver side and front passenger side.
  • The procedure below applies to the driver side.

PROCEDURE

1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

(a) Install the front seat airbag assembly using 2 new nuts.

Torque:

5.5 N·m {56 kgf·cm, 49 in·lbf}

NOTICE:

  • Do not reuse the nuts.
  • Make sure the front seatback frame sub-assembly is not deformed. If it is deformed, replace it with a new one.

(b) Engage the clip.

2. INSTALL FRONT SEAT BACK SEPARATE TYPE COVER WITH PAD

Click here