Supplemental Restraint Systems

Inspection On Vehicle

~2min read

INSPECTION ON VEHICLE

PRECAUTION / NOTICE / HINT

CAUTION:

Make sure to follow the correct removal and installation procedures for the front seat airbag assemblies.

PROCEDURE

1. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for vehicle not involved in collision)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the front seat airbag assemblies installed on the vehicle for any defects.

HINT:

Defects include the following:

  • Scratches, tears, or fraying on the front seatback assembly surface near the front seat airbag assemblies
  • Small cracks on the front seatback assembly near the front seat airbag assemblies
  • Significant discoloration on the front seatback assembly near the front seat airbag assemblies

OK:

There are no defects.

If a defect is detected, replace the separate-type front seatback pad or the separate-type front seatback cover with a new part.

2. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for vehicles that have been in a collision but whose airbag did not deploy)

(a) Perform a diagnostic system check.

Click here

(b) Visually check for defects on the front seat airbag assemblies removed from the vehicle.

HINT:

Defects include the following:

  • Scratches, broken or damaged threads on the textile support surface of the front seat airbag assemblies
  • Drop Marks
  • Deformation of the seating surface of the front seat airbag assemblies
  • Cracks or other damage to the wire harness or connector.

OK:

There are no defects.

If a defect is detected, replace the front seat airbag assembly with a new one.