Selecting the engine switch modes
To change modes, press the engine switch while the brake pedal (Multidrive) or clutch pedal (manual transmission) is released. (The mode changes each time the switch is pressed.)
- OFF*
The hazard warning lights remain operational.The multi-information display does not show anything.
- ACCESSORY mode
Some electrical equipment can be used, such as the audio system."ACCESSORY" will appear on the multi-information display.
- IGNITION ON mode
All electrical equipment can be used."IGNITION ON" will appear on the multi-information display.

*: Vehicles with Multidrive: If the shift lever is not in P when you stop the engine, the engine switch will change to ACCESSORY mode instead of OFF.
When stopping the engine with the shift lever in a position other than P (vehicles equipped with Multidrive)
If you stop the engine while the shift lever is not in P, the engine switch changes to ACCESSORY mode instead of OFF.
Follow the procedure below to set the switch to OFF:
1. Make sure the parking brake is applied.
2. Move the shift lever to P.
3. Check that "ACCESSORY" and "Turn the power off." alternately appear on the multi-information display, then press the engine switch once.
4. Check that "ACCESSORY" and "Turn the power off." are no longer displayed on the multi-information display.
■ Automatic power shut-off Vehicles equipped with Multidrive: If the vehicle is left in ACCESSORY mode for more than 20 minutes, or in ON mode (engine off) for more than one hour while the shift lever is in P, the engine switch is automatically turned off.
Vehicles equipped with a manual transmission: If the vehicle is left in ACCESSORY mode for more than 20 minutes, or in ON mode (engine off) for more than one hour, the engine switch is automatically turned off.
However, this function does not completely prevent battery discharge. Do not leave the vehicle with the engine switch in ACCESSORY or ON mode for an extended period without the engine running.
■ Wear of the electronic key battery
■ Conditions affecting operation
■ Notes on hands-free access
■ If the engine does not start
- The immobilizer system may not have been deactivated. Contact a Toyota dealer, an authorized Toyota repairer, or any reliable repairer.
- Vehicles equipped with Multidrive: Check that the shift lever is fully in P. The engine may not start if the shift lever is not exactly in P.
The message "Shift to P to start." is displayed on the multi-information display.
■ Steering lock After you set the engine switch to OFF and open and close the doors, the steering wheel is locked by the steering lock. To release the steering lock, press the engine switch again.
■ If you cannot release the steering lock The message "Press the ENGINE switch while turning the steering wheel in either direction." is displayed on the multi-information display.
Check that the shift lever is in P (Multidrive). Press the engine switch while turning the steering wheel left and right.

■ Steering lock motor overheat protection To prevent the steering lock motor from overheating, its operation may be suspended if the vehicle engine is repeatedly started and stopped within a short period. In this case, refrain from operating the vehicle engine. After approximately 10 seconds, the steering lock motor will resume operating.
■ When the message "Smart entry & start system malfunction. Refer to owner's manual." is shown on the multi-information display The system may be malfunctioning. Have the vehicle inspected as soon as possible by a Toyota dealer, a Toyota-authorized repairer, or any reliable repairer.
■ If the electronic key battery is discharged
■ Using the engine switch
- If you do not press the engine switch briefly and firmly, it may not change mode or the engine may not start.
- If you try to restart the engine immediately after setting the engine switch to OFF, the engine may not start in some cases. After setting the engine switch to OFF, wait a few seconds before restarting the engine.
■ If the "hands-free" access and starting system has been deactivated through personalization
WARNING■ When starting the engine Always sit in the driver's seat before starting the engine.
Never depress the accelerator pedal while starting the engine.
This could result in a serious or fatal accident.
■ Precautions while driving If the engine fails while driving, do not lock or unlock the doors until the vehicle has come to a complete stop in a safe place. Activating the steering lock under these circumstances could result in a serious or fatal accident.
■ Emergency engine stop
- If you need to stop the engine in an emergency while the vehicle is moving, press and hold the engine switch for more than 2 seconds, or press it briefly 3 or more times in succession. However, while driving, press the engine switch only in an emergency. Stopping the engine while the vehicle is moving does not cause loss of steering or braking control, but these systems are no longer power-assisted. This makes steering and braking more difficult, so it is recommended that you park the vehicle at the side of the road as soon as you can do so safely.
- If you press the engine switch while the vehicle is moving, a warning message is displayed on the multi-information display and a buzzer sounds.
- Vehicles equipped with Multidrive: To restart the engine after stopping it while the vehicle is moving, move the shift lever to N and press the engine switch.
- Vehicles equipped with a manual transmission: To restart the engine after stopping it while the vehicle is moving, move the shift lever to N, depress the clutch pedal, and press the engine switch.
■ To prevent battery discharge
- Do not leave the engine switch in ACCESSORY or ON mode for an extended period without the engine running.
- If "ACCESSORY" or "ON" is displayed on the multi-information display, the engine switch is not in OFF. When leaving the vehicle, always check that the engine switch is set to OFF.
- Vehicles equipped with a Multidrive transmission: Do not stop the engine while the shift lever is not in the P position. If you stop the engine while the shift lever is in another position, the start switch does not go to off but to ACCESSORY mode. If the vehicle is left in ACCESSORY mode, the battery may discharge.
■ When starting the engine
- Do not rev the engine when it is cold.
- If the engine becomes difficult to start or stalls frequently, have your vehicle inspected as soon as possible by a Toyota dealer, a Toyota authorized repairer, or any reliable repairer.
■ Symptoms indicating a malfunction of the start switch If the start switch operation seems somewhat unusual, for example if it catches slightly, this may be a sign of a malfunction. Contact a Toyota dealer, a Toyota-authorized repairer, or any reliable repairer as soon as possible.