Parking Assist / Monitor System

Diagnostic System

~2min read

DIAGNOSTIC SYSTEM

DESCRIPTION

(a) Diagnostic trouble codes (DTCs) can be read from the vehicle's data link connector 3 (DLC3). If the rear view monitor system does not appear to operate correctly, check for possible malfunctions using Techstream and make repairs.

CHECK DLC3

(a) Check DLC3.

Click here

HINT:

This function is used to check the date and time when a camera synchronization error occurred.

CAMERA SYNCHRONOUS ERROR HISTORY

(a) Check the camera synchronous error history.

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch ON.

(3) Turn on the Techstream.

(4) Select the following menu items: Body Electrical / Navigation System / Utility / Camera Synchronous Error History.

Body Electrical > Navigation System > Utility

Camera Synchronous Error History

(5) When an item is stored in the camera synchronous error history, record this data before repairing the radio and display receiver assembly and the rear view camera assembly.

HINT:

The camera synchronous error history can store up to 5 historical data items. If a new camera synchronous error occurs when 5 data items are already stored, the oldest data is erased and the new data is stored.

(b) Clear the camera synchronous error history.

(1) When DTCs are cleared using any of the following operations, the camera synchronous error history will also be cleared.

  • Without navigation system: Click here
  • With navigation system: Click here
  • Clearing using Techstream.
  • Cleared using the "System Check Mode" screen.
  • Cleared using the "Unit Check Mode" screen.

VIDEO EQUIPMENT CONNECTION CHECK

  • Without navigation system: Click here
  • With navigation system: Click here