Parking Assist / Monitor System

Check / Clear DTCs

~1min read

CHECK / CLEAR DTCs

CHECK DTCs

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menu items: Body Electrical / Navigation System / Trouble Codes.

Body Electrical > Navigation System > Trouble Codes

(e) Check the DTCs.

NOTICE:

The radio and display receiver assembly outputs DTCs for the following system. When DTCs other than those in the rear view monitor system diagnostic trouble code chart are output, refer to the diagnostic trouble code chart for the corresponding system.

System

Proceed to

Audio and visual system*1

Navigation system*2

  • *1: without navigation system
  • *2: with navigation system

CLEAR DTCs

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn on the Techstream.

(d) Select the following menu items: Body Electrical / Navigation System / Trouble Codes.

Body Electrical > Navigation System > Clear DTCs

(e) Clear the DTCs.