Parking Brake

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT PARKING BRAKE ACTUATOR ASSEMBLY

(a) Operation Check of Left Parking Brake Actuator Assembly

(1) Apply voltage to the parking brake actuator assembly terminals and check that it operates according to the specifications.

Standard resistance (Left side):

Tester Connection

Parking Brake Actuator Operation

Battery positive (+) -2 (MRL+)

Battery negative (-) -1 (MRL-)

Lock

Battery positive (+) -1 (MRL-)

Battery negative (-) -2 (MRL+)

Release

If the result is not as specified, replace the left parking brake actuator assembly.

*a

Component without wire harness connected

(Left Parking Brake Actuator Assembly)

*b

Lock

*c

Release

(b) Operation Check of Right Parking Brake Actuator Assembly

(1) Apply voltage to the parking brake actuator assembly terminals and check that it operates according to the specifications.

Standard resistance (Right side):

Tester Connection

Parking Brake Actuator Operation

Battery positive (+) -2 (MRR+)

Battery negative (-) -1 (MRR-)

Lock

Battery positive (+) -1 (MRR-)

Battery negative (-) -2 (MRR+)

Release

If the result is not as specified, replace the right parking brake actuator assembly.

*a

Component without wire harness connected

(Right Parking Brake Actuator Assembly)

*b

Lock

*c

Release