Drive Shaft
Inspection
In this manual: Drive Shaft
~1min read
INSPECTION
PROCEDURE
1. INSPECT FRONT AXLE SHAFT ASSEMBLY
(a) Check that the outboard joint has no excessive play in the radial direction. |
![]() |
(b) Check that the inboard joint slides smoothly in the thrust direction.
(c) Check that the inboard joint has no excessive play in the radial direction.
(d) Check that the boots are not damaged.
(e) Check that dimension (A) of each axle shaft meets the specification. Dimension (A):
NOTICE: Keep the axle shaft assembly level during inspection. |
|
Was this page helpful?

