Wiper / Washer

Inspection On Vehicle

~1min read

INSPECTION ON VEHICLE

PROCEDURE

1. INSPECT REAR WIPER MOTOR ASSEMBLY

(a) Operate the rear wiper motor assembly.

*a

Alignment Mark

(b) Stop the operation of the rear wiper motor assembly.

(c) Check the automatic stop position.

HINT:

After the rear wiper motor stops, check the automatic stop position after raising the wiper blade 2 times.

Standard clearance:

Area

Measurement

A

10.0 mm (0.394 in.)

OK:

The rear wiper stops at the position shown in the illustration.