Supplemental Restraint Systems

Inspection On Vehicle

~1min read

INSPECTION ON VEHICLE

PRECAUTION / NOTICE / HINT

CAUTION:

Be sure to follow the correct removal and installation procedures for the curtain airbag assemblies.

PROCEDURE

1. INSPECT CURTAIN AIRBAG ASSEMBLY (Vehicle Not Involved in a Collision)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the installed curtain airbag assemblies for defects.

HINT:

Defects include the following:

  • Cuts on each pillar garnish or roof headlining assembly near the curtain airbag assemblies
  • Small cracks on each pillar garnish or roof headlining assembly near the curtain airbag assemblies
  • Significant discoloration on each pillar garnish or roof headlining assembly near the curtain airbag assemblies

OK:

There are no defects.

If a defect is found, replace each pillar garnish or roof headlining assembly with a new one.

2. INSPECT CURTAIN AIRBAG ASSEMBLY (Vehicle Involved in a Collision but Curtain Airbag Did Not Deploy)

(a) Perform a diagnostic system check.

Click here

(b) Visually check the curtain airbag assemblies removed from the vehicle for defects.

HINT:

Defects include the following:

  • Cuts
  • Small cracks
  • Significant discoloration
  • Cracks or other damage to the connector

OK:

There are no defects.

If any of these defects are found, replace the curtain airbag assembly with a new one.