Brake pedal support assy

1. 1
   REMOVE INSTRUMENT PANEL REINFORCEMENT
2. 2
   REMOVE BRAKE PEDAL RETURN SPRING
3. 3
   REMOVE PUSH ROD PIN
4. 4

   Remove the clip and push rod pin.

1. 1

   Disconnect the stop lamp switch connector.

2. 2

   Normal type: Remove the bolt, 4 nuts and brake pedal support assy.

3. 3

   Link type: Remove the 4 nuts and brake pedal support assy.

a Loosen the lock nut and remove the stop lamp switch.

a Remove the nut, bolt and brake pedal sub−assy from brake pedal support sub−assy.

1. 1
   REMOVE BRAKE PEDAL PAD
2. 2
   REMOVE BRAKE PEDAL BUSH (NORMAL TYPE BRAKE PEDAL)

a Remove the 2 brake pedal bushes from brake pedal sub−assy.

1. 1
   REMOVE STOP LAMP SWITCH CUSHION
2. 2
   INSTALL STOP LAMP SWITCH CUSHION
3. 3
   INSTALL BRAKE PEDAL BUSH (NORMAL TYPE BRAKE PEDAL)

a Install the new 2 brake pedal bushes to brake pedal sub−assy.

HINT: Apply the lithium soap base glycol grease to the parts indicates by arrows.

1. 1
   INSTALL BRAKE PEDAL PAD
2. 2
   INSTALL BRAKE PEDAL SUB−ASSY (NORMAL TYPE BRAKE PEDAL)

a Install the brake pedal sub−assy with the bolt and nut.

a Install the stop lamp switch with the lock nut.

1. 1

   Normal type: Install the brake pedal support assy with the bolt and 4 nuts.

   Torque:
   Bolt: 20 N·m Nut: 13 N·m
2. 2

   Link type: Install the brake pedal support assy with the 4 nuts.

   Torque:
   13 N·m

a Install the push rod pin and clip.

HINT: Apply the lithium soap base glycol grease to the parts indicates by arrows.

1. 1
   INSTALL BRAKE PEDAL RETURN SPRING
2. 2
   INSTALL INSTRUMENT PANEL REINFORCEMENT
3. 3
   CHECK AND ADJUST BRAKE PEDAL HEIGHT
4. 4
   CHECK PEDAL FREE PLAY
5. 5
   CHECK PEDAL RESERVE DISTANCE