Brake

ABS Warning Light does not Come ON

~1min read

DESCRIPTION

The skid control ECU (brake actuator assembly) controls the ABS warning light in the combination meter assembly via CAN communication.

PROCEDURE

  1. INSPECT COMBINATION METER ASSEMBLY

(a) Perform the Active Test of the combination meter assembly using the GTS.

Click here

Body Electrical > Combination Meter > Active Test

ABS Warning

(b) Check the combination meter assembly.

OK:

The ABS warning light turns on or off in accordance with GTS operation.

OK

REPLACE BRAKE ACTUATOR ASSEMBLY

NG

INSPECT METER / GAUGE SYSTEM