How To Proceed With Troubleshooting
HINT:
*: Use the GTS.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS
(a) Interview the customer and confirm the problem.
Click here ![]()
|
CHECK DTC, FREEZE FRAME DATA AND VEHICLE CONTROL HISTORY (RoB)*
(a) Check and record DTCs and Freeze Frame Data.
for DTC Check / Clear: Click here ![]()
for Freeze Frame Data: Click here ![]()
(b) Clear the DTCs and Freeze Frame Data.
for DTC Check / Clear: Click here ![]()
for Freeze Frame Data: Click here ![]()
(c) Reconfirm the DTCs.
(1) Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data.
for DTC Check / Clear: Click here ![]()
for Freeze Frame Data: Click here ![]()
HINT:
- When CAN communication system DTCs are output, repair the CAN communication system first.
Click here
.gif)
- If DTCs related to momentary interruptions are output, perform troubleshooting for those DTCs first.
Click here
.gif)
- If the GTS cannot communicate with the skid control ECU (brake actuator assembly), inspect the CAN communication system.
Click here
.gif)
- If there is no response from the skid control ECU (brake actuator assembly), inspect the supply power circuit.
Click here
.gif)
(d) Check the Vehicle Control History (RoB).
Click here ![]()
Vehicle Control History (RoB)
Chassis > Steering Angle Sensor > UtilityVehicle Control History (RoB)
Result | Proceed to |
|---|---|
DTCs are not output. (Problem symptom occurs.) |
A |
DTCs are output. |
B |
DTCs are not output. (Problem symptom does not occur.) |
C |
DTCs are not output. (Vehicle control history (RoB) is stored.) |
D |
| A | CONFIRM PROBLEM SYMPTOMS |
| B | REPAIR CIRCUITS INDICATED BY OUTPUT DTCS* |
| C | USE SIMULATION METHOD TO CHECK |
| D | REPAIR TROUBLESHOOTING AND REPAIR REGARDING VEHICLE CONTROL HISTORY (RoB)* NOTICE: After performing troubleshooting and repair regarding vehicle control history (RoB), clear the vehicle control history (RoB). |