Brake
Brake Warning Light does not Come ON
In this manual: Brake
~1min read
DESCRIPTION
The skid control ECU (brake actuator assembly) controls the brake system warning light (red indicator) in the combination meter assembly via CAN communication.
PROCEDURE
INSPECT COMBINATION METER ASSEMBLY
(a) Perform the Active Test of the combination meter assembly using the GTS.
Click here ![]()
Brake Warning
(b) Check the combination meter assembly.
OK:
The brake system warning light (red indicator) turns on or off in accordance with GTS operation.
| OK | REPLACE BRAKE ACTUATOR ASSEMBLY |
| NG | INSPECT METER / GAUGE SYSTEM |
Was this page helpful?