Brake
Slip Indicator Light does not Come ON
In this manual: Brake
~1min read
DESCRIPTION
The skid control ECU (brake actuator assembly) controls the slip indicator light in the combination meter assembly via CAN communication.
PROCEDURE
INSPECT COMBINATION METER ASSEMBLY
(a) Perform the Active Test of the combination meter assembly using the GTS.
Click here ![]()
Slip Warning
(b) Check the combination meter assembly.
OK:
The slip indicator light turns on or off in accordance with GTS operation.
| OK | REPLACE BRAKE ACTUATOR ASSEMBLY |
| NG | INSPECT METER / GAUGE SYSTEM |
Was this page helpful?