Vehicle Exterior

Customize Parameters

~2min read

CUSTOMIZE PARAMETERS

CUSTOMIZE POWER BACK DOOR SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Record the current settings before customizing.

(a) Customizing with the GTS.

(1) Enter the following menus: Customize Setting / PSD & PBD operation.

(2) Select the setting by referring to the table below.

PSD & PBD operation

Tester Display

Description

Default

Setting

ECU

PBD SW Operating Condition Setting

Back door control switch operation

0.8s

$00:ON,$01:0.8s

Multiplex network door ECU

PBD Buzzer Function

Status of the the power back door buzzer

ON

$00:OFF,$01:ON

Multiplex network door ECU

PBD Assist Close Function

Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually.

ON

$00:OFF,$01:ON

Multiplex network door ECU

PBD Assist Open Function

Function that enables/disables the power back door assist open operation. When set to ON, the back door will open automatically when the back door opener switch assembly (open switch) is operated.

ON

$00:OFF,$01:ON

Multiplex network door ECU

PBD Door Unlock with One Motion Setting

Function that selects the door or doors to unlock when the back door is locked and the electrical key transmitter sub-assembly (electrical key) is pushed to operate the power back door.*

ALL DOORS

$00:Back Door,$01:All Doors

Multiplex network door ECU

PBD Wireless Function

Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly).

ON

$00:OFF,$01:ON

Multiplex network door ECU

PBD Wireless One Motion Function

Wireless one motion function

ON

$00:OFF,$01:ON

Multiplex network door ECU

PBD Wireless SW Setting

Wireless operation setting condition

Long

$00:1 Time ON,$01:2 Times ON,$02:Long

Multiplex network door ECU

  • *: The settings are enabled only when "PBD Wireless Function" is set to "ON".

(b) Customizing with the combination meter assembly

(1) Turn the ignition switch ON.

(2) Enter the following menus: Settings.

(3) Select the setting by referring to the table below.

Display

Description

Default

Setting

Relevant ECU

System Settings

Function that enables or disables the power back door operation.

On

On or Off

Multiplex network door ECU

Opening Adjustment

Function that can be used to set the power back door opening angle at 6 different positions.

5

User Setting Position, 5, 4, 3, 2 or 1

Multiplex network door ECU

Volume

Function that can be used to set the power back door buzzer volume.

large

large, normal or small

Multiplex network door ECU